Frequently Asked Questions

 We  offer 30 day returns on our items in unopened and unused condition in  its original packaging due to the nature of the product.

We offer a 100% warranty on any damaged, broken or incorrect product.

For returns, contact us thru our contact page with your original order number.

Feel free to reach out to us if you have any questions, we are here to make sure you're 100% satisfied.

The customer is responsible for return postage.

Return mailing address is:

Inline-Filter

1431 E ARABIAN CT.

GILBERT AZ

85296

 Yes, one end cap is removable to refill-recharge when needed.  A  standard spanner wrench is needed to remove the end cap.  Just unscrew  the cap, remove the filter screen and replace the charcoal. 

 It is a common item that can be purchased cost effectively at many  locations locally.   It is commonly used in aquarium filters, fresh  drinking water systems and water purifiers.  We use and recommend pellet  style so it compacts tightly in the trap and there is little to no  dust. 

 It is subjective, but in general circumstance on an automobile stored in a garage, they can last up to a year in normal life.

If you happen to start smelling fuel again, it is time to replace the charcoal.

 Our Inline Filters can be used anywhere fuel, fumes and odors openly vents to the atmosphere thru a vent line.

Cars,  Trucks, RV's Campers, Lawn equipment and more.  They are designed to  eliminate fuel odor especially for garage kept products.

 It  is not recommended to add an additional charcoal filter to a modern vehicle  that already has an active charcoal system installed from the factory.

Our  filters are made for vehicles that did not come with a charcoal  return system, such as classic cars, custom cars and older, pre-emission  vehicles. 

 Yes, they can be used to eliminate a variety of odors from containers that vent directly to the atmosphere. 

 Absolutely.  Our filters come threaded 9/16 x 18 UNF industry standard. 

Our premium kit comes with two (2) 6AN 3/8 barbed fittings that fit standard 3/8 fuel vent lines.

There  is a huge variety of barbs, connectors and fittings available on the  market to fit any possibility you may need for your application.

 We  recommend purchasing the BASIC kit if you plan on supplying your own  independent fittings.

Just make sure you purchase fittings with 9/16 x 18 UNF thread.   

NPT (National Pipe Thread) thread will NOT work with our inline filters.

 Yes  and no.   The activated charcoal lasts a very long time, but will  eventually be "saturated".    You can rinse and clean the charcoal, but  it will never be as good or last as long as its original state and the  length of protection will slowly diminish each time its cleaned.

To  properly "re-charge" it, it will need to be heated to around 1200  Degrees for about 30 minutes to completely burn out any residual  contaminants and return it to its natural, original condition.

   It is generally something that is not worth the effort when replacement charcoal is so readily available and cheap.